Ref. Agricultural
Building to BS5502 Class II – (Level Fill – Grain
Store)
We have pleasure in providing an estimate for a Steel Framed Building:
Length 24.384m (80`), Width 18.288m (60`), Eaves Height 6.096m (20`),
Roof Pitch15º.
Steelwork:
To supply for erection on prepared site and concrete foundations,
steel portal frame 6.096m (20`) centres with 356 x 171 x 45 kg
UB stanchions and 254 x 146 x 31 kg UB rafters.
One gable frame to have 2 no 356 x 171 x 45 kg UB intermediate sub
stanchions. Other gable frame to have 3 no 356 x 171 x 45 kg UB intermediate
sub stanchions, including CHS rafter and side bracing to one end
bay, complete with CHS eaves ties.
All steelwork to be hot dipped galvanised.
Purlins:
To supply galvanised steel purlins bolted to frame at 1.375 m centres.
Eaves beam to be 225 x 75 tanalised timber.
Roof Cladding:
To supply Eternit Profile 6R reinforced corrugated natural grey fibre
cement sheets laid in accordance with manufacturer’s instructions.
Ridge to be close fitting. Verges to be finished with fibre cement
barge boards. Also to include foam fillers.
Roof Lights:
Not included
Rainwater Goods:
Eaves to have Robinsons standard galvanised steel box gutter fixed
externally to brackets welded onto stanchions, complete with 2no
110mm. Ø. PVC downpipes to each side, including mastic sealed
joints.
End Cladding:
One gable end to be clad down to 3.200m (10`6”) below eaves
level, other gable end to be clad own to 4.419m (14’6”)
both with polyester coated box profile steel sheets on tanalised
timber sheeting rails, complete with shedder flashing.
Side Cladding:
Both sides to be clad down to 3.200m (10`6”) below eaves level
with polyester coated box profile steel sheets on tanalised timber
sheeting rails, complete with shedder flashing.
Doors:
1 no. 6.096m (20`) wide x 6.096m (20`) high roller shutter door,
plain galvanised steel finish, electrical operation (isolator by
others), with vermin seals, positioned one end.
1 no. Personnel Door to be 890mm wide x 2095mm high with 10 point
locking and pushbar.
Also to supply landing plates and corner angles for concrete panels
Concrete panels:
To supply 140mm thick pre-stressed concrete panels, to a height of
3.000m, to both sides and one end. Other end to be a height
of 2.000m. Including all necessary bolts, plates and sealants.
(Allowing for doorways.)
Price:
SUPPLY £ 39,500.00
Plus VAT.
NB.Concrete panels are to be fitted to the inside
face of the stanchions.
Robinson’s reserve the right
to alter the specification, subject to building location
and structural calculations.
Robinson’s standard Terms
of Business apply.
|